Labels

“Mysterious Bruise after Plasma Fibroblast”

The Case of the “Mysterious Bruise” – Or Was It?

Ah, the life of a skincare technician is never dull! One moment, you're performing a routine plasma fibroblast treatment, and the next, you're unraveling a mystery that would make Sherlock Holmes proud : )

So, let me take you through a little "scare" story

The Initial Panic: A Worrisome Message

It was the day after a successful plasma fibroblast session. I received a message from one of my clients. Her tone was worried, bordering on panicked:

  • "Hey, I noticed some swelling and what looks like blue bruising under my eyes. Is this normal? Should I be concerned?"
    bruiseaftereyeplasmafibroblast


Well, I thought! Swelling and mild redness after a fibroblast treatment? Totally expected. But bruising? That’s a different story. I immediately started running through potential causes in my mind.

Disclaimer: In the name of full transparency, please be aware that this blog post for the proposed Arnica Gel, contains  an affiliate link, and any purchases made through this link will result in a small commission to me (at no extra cost to you)

Why Swelling and Bruising Can Happen

Swelling after a plasma fibroblast treatment is normal. It’s your body’s natural response to the micro-injuries we create to stimulate collagen production. Think of it as your skin’s way of saying, “I’m working on healing your skin!”

eye-treatment-plasma-fibroblast

But bruising, especially light blue, greyish bruising, can sometimes occur on rare occasions

Plasma fibroblast treatment involves creating tiny controlled injuries to the skin, which can sometimes lead to minor bleeding under the skin's surface, especially in the delicate areas around the eyes. This bleeding can cause bruising, resulting in a blue or purplish tint, for the following reasons:

  1. The skin is particularly thin or sensitive: The under-eye area is delicate, and even a tiny blood vessel might break during the treatment, leading to some discoloration.
  2. Increased blood flow to the area: The treatment encourages blood flow, which is great for healing but might also cause slight bruising if those vessels are close to the surface.
  3. Medications or supplements: Certain medications, like blood thinners, or even supplements like fish oil, can make bruising more likely.
  4. A bit of extra pressure during treatment: Although rare, if a little more pressure was applied during the treatment, it could lead to bruising.

Conclusion

"The greyish shading under my client's eye the day after plasma fibroblast treatment could well be due to bruising.

While bruising is a rare side effect of this cosmetic procedure. It can happen. However, there's no need for concern, as it should gradually fade within a few days to a week."

And yes, bruising can occur in areas adjacent to the treatment site even if no direct work was done on that specific area. The skin around the eyes is particularly delicate and has a lot of blood vessels close to the surface. When plasma fibroblast treatment is performed, the trauma to the skin can sometimes cause blood vessels in nearby areas to rupture, leading to bruising in those regions. Bruising can spread slightly beyond the immediate area of treatment due to the way blood disperses under the skin. This is a normal response to the procedure. Though it can be surprising if it shows up in areas where no direct work was done.

Another possibility—could it be due to iron deficiency?

Iron deficiency itself is unlikely to directly cause bruising in a specific area after a procedure like plasma fibroblast treatment. However, iron deficiency can make a person more prone to bruising in general. This is because iron is crucial for producing hemoglobin, which helps your blood carry oxygen to tissues and plays a role in blood clotting. 

When you’re deficient in iron, your body may struggle to repair blood vessels efficiently, leading to easier bruising. In the context of plasma fibroblast, the bruising is more likely due to the procedure itself rather than an iron deficiency. 

However, if the client experiences frequent bruising in other areas or have other symptoms of iron deficiency (such as fatigue, pale skin, or shortness of breath), it might be worth for them to discuss it with their healthcare provider. They can run tests to determine if iron deficiency is a contributing factor and advise them on appropriate treatments or dietary adjustments.

Now, let me tell you, in my 10 years of doing these treatments, I’ve never had a client report blue bruising after a session. This was a first for me! 

  • I quickly responded with some calming advice:
"Don’t worry! This can happen sometimes, but let’s keep an eye on it. Make sure to apply cold compresses and avoid any strenuous activities."
direct after-eyes-plasma-fibroblast

A Closer Look at the Evidence

I decided to closely examine the pictures I had taken during the consultation. I zoomed in, scrutinizing every detail. And then…

Eureka! . . . There it was, it looked like a subtle trace of mascara residue, right under the rim of the eye, exactly where the "bruise" had appeared.

before-plasma-pen-treatment-eyes


Could it be? Was this actual “bruising” or nothing more than leftover makeup from yesterday?
I usually always clean all my client's skin prior to treatment, but this was right near the rim of the eye—maybe I missed that spot because it was so close to the rim of the eye area.

  • I contacted my client immediately.
"Hey, I just reviewed your before pictures by zooming in, and it looks like it could be leftover mascara, maybe not a bruise."

What we thought was a bruise could actually be just a bit of makeup residue that decided to stick around post-treatment.

Lesson Learned: Why We Take Before Pictures (and Remove ALL Makeup)

This experience was a good reminder of why taking clear, close-up pictures before the treatment is crucial. It’s not just about tracking progress – it’s about avoiding unnecessary panic. and, of course, it also highlights the importance of ensuring the skin is completely free from any makeup before we start.

To all technicians out there, let this be a little lesson to prevent a potential bruise scare like the one we had.

Make sure your client's skin is squeaky clean before starting the treatment. It will save both the technician and the client from a potential “bruise scare.”

But What If It’s Real Bruising? and How to Treat Blue Bruising After Fibroblast

If one of your clients ever does experience some bruising after a fibroblast treatment (and you’re sure it’s not leftover makeup!), here’s what you can advise your client to do.
  1. Cold Compresses: The client to apply a cold compress or ice pack wrapped in a cloth to the area for 10-15 minutes at a time. This can also help reduce swelling and minimize the appearance of bruising. 
  2. To Apply,: Arnica Gel or Cream: Arnica is a natural remedy that’s known for reducing bruising and inflammation. The client to apply it gently to the affected area a few times a day. affiliate link on Amazon.
  3. To Keep the Area Elevated: If the bruising is around the eyes, they need to try and sleep with their head slightly elevated. This helps reduce fluid accumulation in the area. 
  4. If approved by their doctor, and to avoid Blood Thinners, or supplements like taking aspirin, ibuprofen, or all blood-thinning medications before the procedure, as this can exacerbate bruising. 
  5. To Give It Time: Most bruising will fade within a week or two. They just need to be gentle with the area and let their body do its thing. 
  6. To Follow The Aftercare Instructions provided by their practitioner.

Outcome

In the end, all was well with my client with the “mysterious bruise” 

Surely I’ll be double-checking for any makeup residue from now on before treating a client!

I hope this helps you if you ever experience something similar—no need to panic! Let me know in the comments: by looking at the pictures, do you think this was leftover mascara or an actual bruise?
bruisebeforeandaftereyeplasmafibroblast

"Download the Detailed AFTERCARE for your clients"

Join me on this journey to a better skin, or to become a better technician, or both! 

Subscribe to my Blog to unlock your free e-book on how to slow down the skin's aging process. + As a bonus, discover everything you need to know about Plasma Fibroblast treatments (all in one book) if you're considering this amazing treatment! 

To get your hands on this FREE e-book: Please be so kind as to do the following:
1. Follow my blog here. 
2. Subscribe to my YouTube channel. (only if you wish to see videos on skin care.
3. Then click this link to download your FREE e-book.

“Plasma Fibroblast Technicians" is also a valuable educational handout for your clients, Considering Plasma Fibroblast Skin Tightening. The 1st intro to my ebook 6.

Thank you for visiting and subscribing to my blog 'for free newsletters, tips, and skin care wisdom.

Keep on Glowing!

Susan 

ROSASS ❤

For Technicians get my Plasma Fibroblast Complete Series e-book 6: Step-by-Step In-depth Training manual, “All You Need to Know (not just mapping)” here  Or

If you prefer it in the printed format you can order a copy on Amazon here

ツ GET IN TOUCH WITH ME, 





Email Post
Labels: